SD map: usb 2-2: device descriptor read/64, error -62



  • Internet http://ubuntuforums.org/archive/index.php/t-898939.html They write what they have to do.

     rmmod ehci_hcd
    

    did.

    root@mh:/home/xuser# rmmod ehci_hcd
    rmmod: ERROR: Module ehci_hcd is builtin.
    root@mh:/home/xuser# 
    

    What's the flash drive? It's a SD card, it's a transient, thought the transition was wrong. I put it through a numerical camera, the same thing. The transponder checked the numerical map, the transient is working.

    When the map is connected through a photo or a transient, it is not defined (or is almost determined). Indicator blinks and blinks... but the log will show that the flash drive is detected. And then everything goes away: What else can we do?

    [93668.296028] usb 2-2: new full-speed USB device number 26 using ohci-pci
    [93668.476036] usb 2-2: device descriptor read/64, error -62
    [93668.984804] usb 2-2: not running at top speed; connect to a high speed hub
    [93669.002809] usb 2-2: New USB device found, idVendor=14cd, idProduct=8168
    [93669.002821] usb 2-2: New USB device strings: Mfr=1, Product=3, SerialNumber=2
    [93669.002828] usb 2-2: Product: USB Mass Storage Device
    [93669.002833] usb 2-2: Manufacturer: USB Reader  
    [93669.002838] usb 2-2: SerialNumber: 816820090724
    [93669.005910] usb-storage 2-2:1.0: USB Mass Storage device detected
    [93669.006135] scsi host192: usb-storage 2-2:1.0
    [93670.012880] scsi 192:0:0:0: Direct-Access     USB Mass  Storage Device       PQ: 0 ANSI: 0 CCS
    [93670.016362] sd 192:0:0:0: Attached scsi generic sg2 type 0
    [93670.200046] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93670.600053] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93670.780033] usb 2-2: device descriptor read/64, error -62
    [93671.280038] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93671.684050] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93671.864040] usb 2-2: device descriptor read/64, error -62
    [93672.364065] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93672.764034] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93672.944068] usb 2-2: device descriptor read/64, error -62
    [93673.444069] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93673.844042] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93674.024031] usb 2-2: device descriptor read/64, error -62
    [93674.528041] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93674.928056] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93675.332048] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93675.736045] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93675.916037] usb 2-2: device descriptor read/64, error -62
    [93676.416051] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93676.816038] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93676.996036] usb 2-2: device descriptor read/64, error -62
    [93677.500050] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93677.900050] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93678.080035] usb 2-2: device descriptor read/64, error -62
    [93678.584031] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93678.984063] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93679.164035] usb 2-2: device descriptor read/64, error -62
    [93679.664034] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93680.064033] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93680.672036] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93681.068054] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93681.248034] usb 2-2: device descriptor read/64, error -62
    [93681.752033] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93682.152044] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93682.332045] usb 2-2: device descriptor read/64, error -62
    [93682.642855] sd 192:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
    [93682.642864] sd 192:0:0:0: [sdc] Sense not available.
    [93682.649820] sd 192:0:0:0: [sdc] Write Protect is off
    [93682.649828] sd 192:0:0:0: [sdc] Mode Sense: 03 00 00 00
    [93682.656806] sd 192:0:0:0: [sdc] No Caching mode page found
    [93682.656818] sd 192:0:0:0: [sdc] Assuming drive cache: write through
    [93682.844062] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93683.248033] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93683.644043] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93684.048061] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93684.228045] usb 2-2: device descriptor read/64, error -62
    [93684.728037] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93685.132050] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93685.524058] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93685.924038] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93686.320042] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93686.716062] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93686.896062] usb 2-2: device descriptor read/64, error -62
    [93687.396054] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93687.800043] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93687.980036] usb 2-2: device descriptor read/64, error -62
    [93688.480040] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93688.880034] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93689.060031] usb 2-2: device descriptor read/64, error -62
    [93689.564050] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93689.968049] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93690.368058] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93690.776038] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93690.956034] usb 2-2: device descriptor read/64, error -62
    [93691.452075] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93691.852048] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93692.248032] usb 2-2: reset full-speed USB device number 26 using ohci-pci
    [93692.454801] usb 2-2: device firmware changed
    [93692.454878] usb 2-2: USB disconnect, device number 26
    [93692.460133] sd 192:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    [93692.460142] sd 192:0:0:0: [sdc] Sense not available.
    [93692.460174] sd 192:0:0:0: [sdc] Attached SCSI removable disk
    [93692.680045] usb 2-2: new full-speed USB device number 27 using ohci-pci
    [93692.860047] usb 2-2: device descriptor read/64, error -62
    [93693.368805] usb 2-2: not running at top speed; connect to a high speed hub
    [93693.386799] usb 2-2: New USB device found, idVendor=14cd, idProduct=8168
    [93693.386806] usb 2-2: New USB device strings: Mfr=1, Product=3, SerialNumber=2
    [93693.386812] usb 2-2: Product: USB Mass Storage Device
    [93693.386818] usb 2-2: Manufacturer: USB Reader  
    [93693.386823] usb 2-2: SerialNumber: 816820090724
    [93693.389920] usb-storage 2-2:1.0: USB Mass Storage device detected
    [93693.390143] scsi host193: usb-storage 2-2:1.0
    [93694.396833] scsi 193:0:0:0: Direct-Access     USB Mass  Storage Device       PQ: 0 ANSI: 0 CCS
    [93694.397235] sd 193:0:0:0: Attached scsi generic sg2 type 0
    [93694.580062] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93694.984031] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93695.380053] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93695.784044] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93696.180044] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93696.588065] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93696.768036] usb 2-2: device descriptor read/64, error -62
    [93697.268057] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93697.668037] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93697.848035] usb 2-2: device descriptor read/64, error -62
    [93698.352038] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93698.748036] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93699.152056] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93699.552039] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93699.956051] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93700.360050] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93700.756032] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93700.936030] usb 2-2: device descriptor read/64, error -62
    [93701.440040] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93701.844048] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93702.244035] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93702.645023] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93703.044034] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93703.452035] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93703.632047] usb 2-2: device descriptor read/64, error -62
    [93704.136055] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93704.540055] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93704.940045] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93705.146847] sd 193:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
    [93705.146856] sd 193:0:0:0: [sdc] Sense not available.
    [93705.344058] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93705.525257] usb 2-2: device descriptor read/64, error -62
    [93705.845830] sd 193:0:0:0: [sdc] Write Protect is off
    [93705.845840] sd 193:0:0:0: [sdc] Mode Sense: 03 00 00 00
    [93705.852809] sd 193:0:0:0: [sdc] No Caching mode page found
    [93705.852815] sd 193:0:0:0: [sdc] Assuming drive cache: write through
    [93706.036043] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93706.440061] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93706.620037] usb 2-2: device descriptor read/64, error -62
    [93707.120050] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93707.520057] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93707.700031] usb 2-2: device descriptor read/64, error -62
    [93708.200031] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93708.588033] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93708.768036] usb 2-2: device descriptor read/64, error -62
    [93709.264046] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93709.664037] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93709.844057] usb 2-2: device descriptor read/64, error -62
    [93710.344043] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93710.752040] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93710.932031] usb 2-2: device descriptor read/64, error -62
    [93711.432036] usb 2-2: reset full-speed USB device number 27 using ohci-pci
    [93711.638810] usb 2-2: can't restore configuration #1 (error=-62)
    [93711.638902] usb 2-2: USB disconnect, device number 27
    [93711.644272] sd 193:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    [93711.644285] sd 193:0:0:0: [sdc] Sense not available.
    [93711.644338] sd 193:0:0:0: [sdc] Attached SCSI removable disk
    [93711.836034] usb 2-2: new full-speed USB device number 28 using ohci-pci
    [93712.016050] usb 2-2: device descriptor read/64, error -62
    [93712.320795] usb 2-2: not running at top speed; connect to a high speed hub
    [93712.356796] usb 2-2: New USB device found, idVendor=14cd, idProduct=8168
    [93712.356803] usb 2-2: New USB device strings: Mfr=1, Product=3, SerialNumber=2
    [93712.356806] usb 2-2: Manufacturer: USB Reader  
    [93712.356809] usb 2-2: SerialNumber: 816820090724
    [93712.359852] usb-storage 2-2:1.0: USB Mass Storage device detected
    [93712.359984] scsi host194: usb-storage 2-2:1.0
    [93713.368875] scsi 194:0:0:0: Direct-Access     USB Mass  Storage Device       PQ: 0 ANSI: 0 CCS
    [93713.371599] sd 194:0:0:0: Attached scsi generic sg2 type 0
    [93713.552035] usb 2-2: reset full-speed USB device number 28 using ohci-pci
    [93713.758799] usb 2-2: can't restore configuration #1 (error=-62)
    [93713.758893] usb 2-2: USB disconnect, device number 28
    [93713.764215] sd 194:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    [93713.764224] sd 194:0:0:0: [sdc] Sense not available.
    [93713.764258] sd 194:0:0:0: [sdc] Write Protect is off
    [93713.764266] sd 194:0:0:0: [sdc] Mode Sense: 00 00 00 00
    [93713.764291] sd 194:0:0:0: [sdc] Asking for cache data failed
    [93713.764297] sd 194:0:0:0: [sdc] Assuming drive cache: write through
    [93713.764583] sd 194:0:0:0: [sdc] Attached SCSI removable disk
    [93713.960058] usb 2-2: new full-speed USB device number 29 using ohci-pci
    [93714.364812] usb 2-2: not running at top speed; connect to a high speed hub
    [93714.382807] usb 2-2: New USB device found, idVendor=14cd, idProduct=8168
    [93714.382818] usb 2-2: New USB device strings: Mfr=1, Product=3, SerialNumber=2
    [93714.382824] usb 2-2: Product: USB Mass Storage Device
    [93714.382829] usb 2-2: Manufacturer: USB Reader  
    [93714.382834] usb 2-2: SerialNumber: 816820090724
    [93714.385910] usb-storage 2-2:1.0: USB Mass Storage device detected
    [93714.386176] scsi host195: usb-storage 2-2:1.0
    [93715.392830] scsi 195:0:0:0: Direct-Access     USB Mass  Storage Device       PQ: 0 ANSI: 0 CCS
    [93715.393201] sd 195:0:0:0: Attached scsi generic sg2 type 0
    [93715.580037] usb 2-2: reset full-speed USB device number 29 using ohci-pci
    [93715.984033] usb 2-2: reset full-speed USB device number 29 using ohci-pci
    [93716.384058] usb 2-2: reset full-speed USB device number 29 using ohci-pci
    [93716.796036] usb 2-2: reset full-speed USB device number 29 using ohci-pci
    [93716.976052] usb 2-2: device descriptor read/64, error -62
    [93717.476068] usb 2-2: reset full-speed USB device number 29 using ohci-pci
    [93717.884055] usb 2-2: reset full-speed USB device number 29 using ohci-pci
    [93718.064065] usb 2-2: device descriptor read/64, error -62
    [93718.564043] usb 2-2: reset full-speed USB device number 29 using ohci-pci
    [93718.770798] usb 2-2: can't restore configuration #1 (error=-62)
    [93718.770861] usb 2-2: USB disconnect, device number 29
    [93718.776769] sd 195:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    [93718.776778] sd 195:0:0:0: [sdc] Sense not available.
    [93718.776796] sd 195:0:0:0: [sdc] Write Protect is off
    [93718.776801] sd 195:0:0:0: [sdc] Mode Sense: 00 00 00 00
    [93718.776817] sd 195:0:0:0: [sdc] Asking for cache data failed
    [93718.776821] sd 195:0:0:0: [sdc] Assuming drive cache: write through
    [93718.777089] sd 195:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    [93718.777093] sd 195:0:0:0: [sdc] Sense not available.
    [93718.777119] sd 195:0:0:0: [sdc] Attached SCSI removable disk
    [93718.968067] usb 2-2: new full-speed USB device number 30 using ohci-pci
    [93719.148037] usb 2-2: device descriptor read/64, error -62
    [93719.479797] usb 2-2: New USB device found, idVendor=14cd, idProduct=8168
    [93719.479804] usb 2-2: New USB device strings: Mfr=1, Product=3, SerialNumber=2
    [93719.479808] usb 2-2: Product: USB Mass Storage Device
    [93719.479811] usb 2-2: Manufacturer: USB Reader  
    [93719.479813] usb 2-2: SerialNumber: 816820090724
    [93719.482793] usb 2-2: can't set config #1, error -62
    root@mh:/home/xuser# 
    

    free of sd

    root@mh:/home/xuser# lsusb 
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 003: ID 1c4f:0034 SiGma Micro 
    Bus 002 Device 044: ID 1a2c:2124 China Resource Semico Co., Ltd 
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    root@mh:/home/xuser# lsblk 
    NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
    sda      8:0    0  55,9G  0 disk 
    ├─sda1   8:1    0   1,9G  0 part [SWAP]
    └─sda2   8:2    0    54G  0 part /
    sdb      8:16   0 232,9G  0 disk 
    └─sdb1   8:17   0 232,9G  0 part /media/xuser/9bd1fae0-bcb9-4677-9f1a-28ac7079dccc
    root@mh:/home/xuser# 
    

    sd card

    root@mh:/home/xuser# lsusb 
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 003: ID 1c4f:0034 SiGma Micro 
    Bus 002 Device 044: ID 1a2c:2124 China Resource Semico Co., Ltd 
    Bus 002 Device 101: ID 14cd:8168 Super Top 
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    root@mh:/home/xuser# lsblk 
    NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
    sda      8:0    0  55,9G  0 disk 
    ├─sda1   8:1    0   1,9G  0 part [SWAP]
    └─sda2   8:2    0    54G  0 part /
    sdb      8:16   0 232,9G  0 disk 
    └─sdb1   8:17   0 232,9G  0 part /media/xuser/9bd1fae0-bcb9-4677-9f1a-28ac7079dccc
    root@mh:/home/xuser# 
    


  • error -62 It's a time of operation, that is, a possible flash drive is just unworking, but it's working in the same picture, although it's possible a mistake in the USB drive. You can check Live's disk with another system.




Suggested Topics

  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2